Call Now On: Great Yarmouth 01493 603 797
Great Yarmouth 01493 603 797

ID Mount Flange Facer

Flange & Pipeline Equipment > ID Mount Flange Facer
We offer a wide variety of rugged and innovative portable flange facers for 0.75" to 120" (19.1mm to 3050 mm) diameters, for ID mounting. Several of our machines can be configured for facing, milling or both, and many of our models reface, mill, bevel, square, counterbore, or cut end-prep configurations for welding. For easy setup, smaller units use an integral mandrel to quickly lock into place, while the larger units can be installed with a separate mount or chuck to which the facer body is installed.

Model BF - ID Mount Flange Facer

The model BF is a versatile model for flanges ranging in size from 3/4″ to 4.12″ (19.1mm to 104.6 mm) O.D. Surface finishes can be adjusted between 63 and 250 RMS for the model BF.

Model MSF - ID Mount Flange Facer

The model MSF is based on the popular model MS bevel tool. Flanges from 1-1/4″ I.D. to 6.19″ O.D. (31.8mm to 157.2 mm) are quickly and accurately resurfaced. Surface finishes can be adjusted between 63 and 500 RMS for the model MSF.

Model MTF - ID Mount Flange Facer

The model MTF is based on the model MT I.D. mount pipe machining tool. It has a working range from 3-1/4″ I.D. to 10.63″ O.D. (82.6 to 270.0 mm) flanges. Surface finishes can be adjusted between 63 and 500 RMS for the model MTF.

Model MFTF - ID Mount Flange Facer

The model MFTF will accurately resurface raised gasket areas and bolt pattern surfaces from 4-1/4″ I.D. to 16.25 ” O.D. (108.8mm to 412.8 mm).Surface finishes can be adjusted between 63 and 500 RMS for the model MFTF.

FF5000 - ID Mount Flange Facer

A two-piece mounting system makes this low profile unit easy to set up and align. Lightweight and simple to use whether you’re facing, beveling or turning valve, pipe or pump flanges. Facing diameters range from 5" to 24" (127mm to 609.6 mm).

Facing Diameter: 5" to 24" (127mm to 609.6 mm)
Milling Diameter: N/A
ID Mounting Diameter: 5" to 18" (88.9mm to 457.2 mm)
OD Mounting Diameter: N/A
Power Option: Pneumatic

FF5300 - ID Mount Flange Facer

Forged from 40 years of flange facing experience, the FF5300 Flange Facer sets a new standard in compact flange facing. Easy to set-up and run with a new modular design including an interchangeable turning arm, giving users the flexibility to go out to 40 inches (1,016 mm) and still produce the desired finish. Powerful and simple to use whether you’re facing, beveling or turning valve, pipe, or pump flanges. Comes with a more compact swing diameter with a minimum clearance of 22.75" (577.9 mm). Facing diameters range from 5.7" to 40" (144.8 to 1016 mm).

Facing Diameter: 5.7" to 32" (144.8mm to 812.8 mm) and 5.7" to 40" (144.8mm to 1016 mm) with extended arm
Milling Diameter: Single point only
ID Mounting Diameter: 5.7" to 32" (144.8mm to 812.8 mm)
OD Mounting Diameter: ID mount only
Minimum Swing Diameter: 22.75" (577.9 mm) and
26.25" (666.8 mm) with extended arm
Power Option: Pneumatic

FF6300 - ID Mount Flange Facer

Performance, versatility and safety. Delivers high-torque performance to quickly re-surface flanges and repair sealing and bearing surfaces efficiently and cost-effectively. Can be configured in either ID, OD, or surface-mount configurations for a variety of machining applications, with a quick and easy change over. Facing diameters range from 11.8" to 60" (299.7mm to 1524.0 mm).

ID Facing Diameter: 11.8" to 60" (299.7mm to 1524.0 mm)
Milling Diameter: N/A
ID Mounting Diameter: 11.8" to 57.5" (299.7mm to 1460.5 mm)
OD Facing Diameter: 8.5" to 60" (215.9mm to 1524.0 mm)
OD Mounting Diameter: 38.1" to 63.8" (967.7mm to 1620.5 mm)
Power Option: Pneumatic or Hydraulic

FF7200 - ID Mount Flange Facer

A heavy-duty flange facer with both facing AND milling capabilities. The FF7200 Flange Facer features a tool head that rotates a full 360 degrees, infinitely variable feed rates, and remotely adjustable feed so radial and axial feeds can be done quickly and safely. Facing diameters from 30" to 72" (762mm to 1828.8 mm), milling diameters from 35" to 72" (889mm to 1828.8 mm).

Facing Diameter: 30" to 72" (762mm to 1828.8 mm)
Milling Diameter: 35" to 72" (889mm to 1828.8 mm)
ID Mounting Diameter: 30" to 72" (762mm to 1828.8 mm)
OD Mounting Diameter: N/A
Power Option: Pneumatic or Hydraulic

FF8200 - ID Mount Flange Facer

A true workhorse, with the size and muscle to machine large-diameter flange faces. It gives up nothing in accuracy thanks to its rigidity, easy positioning and uniform rotation rates, even when mounted in vertical flanges. Features a tool head that can be rotated a full 360°, infinitely variable feed rates, and remotely adjustable air-powered feedbox so radial and axial feeds can be done quickly and safely. Facing AND milling diameters range from 45" to 120" (1143mm to 3048 mm).

Facing Diameter: 45" to 120" (1143mm to 3048 mm)
Milling Diameter: 45" to 120" (1143mm to 3048 mm)
ID Mounting Diameter: 45" to 120" (1143mm to 3048 mm)
OD Mounting Diameter: 89.8" to 136.4" (2280.9mm to 3464.6 mm)
Power Option: Pneumatic or Hydraulic
ARRANGE A FREE TRIAL NOW
We offer free trials on a lot of our equipment
give us a call and we'll be more than happy to discuss your requirements


CALLBACK / ENQUIRY
fill in your details below and we'll give you a call.

 


CONTACT INFORMATION
Gee-Force Hydraulics
Unit 12 Blackfriars Court
Excalibur Road, Beacon Business Park
Great Yarmouth, Norfolk NR31 7RQ

Email: sales@gee-force.co.uk
Tel No: +44 (0)1493 603797

CONTACT INFORMATION
Gee-Force Hydraulics
Unit 1, Enterprise Court
Gapton Hall Road
Great Yarmouth, Norfolk NR31 0NL

Email: sales@gee-force.co.uk
Tel No: +44 (0)1493 603797

Sitemap | Privacy & Cookies
© 2019 Gee-Force Hydraulics - All Rights Reserved